在线观看成人网站-国产精品久久久亚洲-啦啦啦高清影视在线观看视频-来一水AV@lysav

咨詢電話:13699145010
Products產品中心
首頁 > 產品中心 > 橡膠塑料滑動摩擦磨損試驗機 > M-200塑料滑動摩擦試驗機 > m-200計算機控制橡膠塑料滑動摩擦磨損試驗機

m-200計算機控制橡膠塑料滑動摩擦磨損試驗機

簡要描述:該試驗機主要用來測量材料在滑動、滾動、滑滾復合摩擦或間歇摩擦情況下的滑動磨損特性和疲勞磨損特性。

  • 產品型號:
  • 廠商性質:生產廠家
  • 更新時間:2024-08-18
  • 訪  問  量:1780

詳細介紹

品牌AIRTIMES/中航時代

M-200橡膠塑料滑動摩擦磨損試驗機(計算機控制)


一、適用范圍及功能

 該試驗機主要用來測量材料在滑動、滾動、滑滾復合摩擦或間歇摩擦情況下的滑動磨損特性和疲勞磨損特性。

符合標準:GB/T 3960-1983 塑料滑動摩擦磨損試驗方法  GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法

另外本廠生產的計算機控制塑料滑動摩擦試驗機是在現有電子塑料滑動摩擦試驗機的基礎上又增加了很多試驗功能,可以同時顯示扭矩-時間曲線,隨意設定試驗次數,顯示當前試驗次數,設定時間及當前試驗時間等多種功能,本機還配有彩色打印機,可以打印出帶有曲線,表格數據,試驗單位名頭的精美的試驗報告單。

適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦,磨損性能測試,也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。本機采用高精度扭矩傳感器,16 位單片機電子處理系統,使得本儀器各項測試指標精度非常高。由于集成程度很高,所以設備本身的穩定性*,本機具有一次設置,全自動運行,實驗結束后自動停機,并檢測磨損程度,同時通過打印機打印試驗數據等功能。是各個科研單位,大學,企業實驗室的*檢測設備。本儀器融合了當前的智能電路系統進行控制,并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成,本儀器具有測控精度高,操作便捷等優勢,是科研院所、質檢機構、實驗室研究*的試驗設備。

M-200型摩擦磨損試驗機主要由試驗主機及智能控制系統兩大部分構成,通過微機控制系統進行操作試驗,在試驗過程中同時可以顯示數值、扭矩、時間曲線,并可以隨意設定試驗次數,顯示當前試驗數值,設定時間及當前試驗時間等多種功能,隨機配備彩色打印機,可以打印出帶有曲線、表格數據等標準要求的試驗報告。



、精度:

      1、速度精度:1%

     2、負荷精度:0.5%

     3、摩擦力矩精度:1%

     4、計數器精度:1S

     5、傳感器測量精度:1% FS



、功能特點:

    

編號

功能特點

參數

01

試樣尺寸

30mm×7mm×6mm

02

轉動速度

0-200轉/分  (可調)

03

負    荷

196N ± 0.1%(可增至392N)

04

摩擦環尺寸

¢40×10mm ,倒角0.5×45°,外圓表面與內圓同心度偏差小于0.01 

05

摩擦環材質

45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8

06

摩擦力矩

0--4N·m

07

砝碼重量

4KG砝碼一件,1KG砝碼4件,可實現重量疊加功能


四、主要配置及附件:(計算機控制)


編號

主要配置

數量

01

試驗主機

一臺

02

高精度扭矩傳感器

一只

03

計算機數據采集卡

一塊

04

計算機

一臺(品牌)

05

彩色激光噴墨打印機

一臺

06

計算機控制軟件

一套

07

4Kg 砝碼

兩件(備用一套)

08

標準磨擦環

四件(備用兩件)

09

產品使用說明書

一份

10

產品合格證

一份

11

產品裝箱單

一份

12

整機重量

約87 公斤


Friction and wear testing machine M-200 rubber plastic sliding (computer control)

一、適用范圍及功能

One, the scope and function

該試驗機主要用來測量材料在滑動、滾動、滑滾復合摩擦或間歇摩擦情況下的滑動磨損特性和疲勞磨損特性。

The testing machine is mainly used to measure the material rolling, rolling sliding wear and fatigue wear properties of the composite friction or intermittent friction in the case of sliding.

符合標準:GB/T 3960-1983 塑料滑動摩擦磨損試驗方法 GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法

Standard: GB/T 3960-1983 plastic sliding friction wear test method test method GB/T 9141.8-1999 flexible graphite sheet sliding friction coefficient

另外本廠生產的計算機控制塑料滑動摩擦試驗機是在現有電子塑料滑動摩擦試驗機的基礎上又增加了很多試驗功能,可以同時顯示扭矩-時間曲線,隨意設定試驗次數,顯示當前試驗次數,設定時間及當前試驗時間等多種功能,本機還配有彩色打印機,可以打印出帶有曲線,表格數據,試驗單位名頭的精美的試驗報告單。

The factory production of computer control of plastic sliding friction test machine is based on the existing electronic plastic sliding friction test machine and increase a lot of test function, can display the torque time curve, testing time setting free, displays the current number of tests, a variety of functions the setting time and the test time, the machine is also equipped with color the printer can print out, with a curve, form data, test unit name test report of fine single.

適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦,磨損性能測試,也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。本機采用高精度扭矩傳感器,16 位單片機電子處理系統,使得本儀器各項測試指標精度非常高。由于集成程度很高,所以設備本身的穩定性*,本機具有一次設置,全自動運行,實驗結束后自動停機,并檢測磨損程度,同時通過打印機打印試驗數據等功能。是各個科研單位,大學,企業實驗室的*檢測設備。本儀器融合了當前的智能電路系統進行控制,并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成,本儀器具有測控精度高,操作便捷等優勢,是科研院所、質檢機構、實驗室研究*的試驗設備。

Sliding friction is suitable for plastic products, rubber products, graphite sheet or other composite materials, wear performance test, also can be the friction force, the test sample in the friction coefficient and wear volume determination. Also, the friction force in the test specimen friction coefficient and wear volume determination. This machine adopts high precision torque sensor, 16 bit single-chip electronic processing system, the instrument has high precision of test indexes. Due to the integrated degree is very high, so the equipment itself excellent stability, the machine has a set, automatic operation, automatic stop after the end of the experiment, and detect the wear degree, at the same time, through the printer to print the test data and other functions. Is the scientific research unit, University Enterprise laboratories, the necessary testing equipment. The instrument combines the latest inligent circuit control system, combined with the old M-200 wear testing machine, friction and function upgrade, the instrument has high control accuracy, convenient operation and other advantages, is the study of test equipment, quality inspection institutions, the preferred the laboratory research institute.

M-200型摩擦磨損試驗機主要由試驗主機及智能控制系統兩大部分構成,通過微機控制系統進行操作試驗,在試驗過程中同時可以顯示數值、扭矩、時間曲線,并可以隨意設定試驗次數,顯示當前試驗數值,設定時間及當前試驗時間等多種功能,隨機配備彩色打印機,可以打印出帶有曲線、表格數據等標準要求的試驗報告。

Friction and wear testing machine is mainly composed of the host and the inligent control system consists of two parts of M-200, operation test by microcomputer control system, in the process of test and can display the numerical, torque, time curve, and can set the test number freely, display the current test data, a variety of functions the setting time and the test time, random equipped with color printer, you can print the test report with a curve, form data standard.

二、精度:

Two, accuracy:

1、速度精度:1%

1, speed accuracy: 1%

2、負荷精度:0.5%

2, load precision: 0.5%

3、摩擦力矩精度:1%

3, the friction torque accuracy: 1%

4、計數器精度:1S

4, the counter accuracy: 1S

5、傳感器測量精度:1% FS

The 5, sensor measurement accuracy: 1% FS

三、功能特點:

Three, function characteristics:

編號 功能特點 參數

Numbering function parameters

01 試樣尺寸 30mm×7mm×6mm

01 sample size of 30mm * 7mm * 6mm

02 轉動速度 0-200轉/分 (可調)

The 02 rotating speed of 0-200 RPM (adjustable)

03 負 荷 196N ± 0.1%(可增至392N)

03 load 196N ± 0.1% (to 392N)

04 摩擦環尺寸 ¢40×10mm ,倒角0.5×45°,外圓表面與內圓同心度偏差小于0.01

04 the friction ring size - 40 x 10mm, 0.5 x 45 ° chamfer, outer surface and inner circle concentricity deviation is less than 0.01

05 摩擦環材質 45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8

05 friction rings made of 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish ▼ 8

06 摩擦力矩 0--4N·m

06 the friction torque of 0--4N · M

07 砝碼重量 4KG砝碼一件,1KG砝碼4件,可實現重量疊加功能

07 weight 4KG weight a, 1KG weight 4, weight function can be realized.

四、主要配置及附件:(計算機控制)

Four, the main configuration and accessories: (computer control)

編號 主要配置 數量

Number of major configuration

01 試驗主機 一臺

The 01 test a host

02 高精度扭矩傳感器 一只

02 high precision torque sensor a

03 計算機數據采集卡 一塊

03 computer data acquisition card a

04 計算機 一臺(品牌)

04 computer (brand)

05 彩色激光噴墨打印機 一臺

05 color laser jet printer a

06 計算機控制軟件 一套

06 computer control software package

07 4Kg 砝碼 兩件(備用一套)

07 4Kg weight two (alternate set)

08 標準磨擦環 四件(備用兩件)

08 Standard friction ring four (reserve two pieces)

09 產品使用說明書 一份

09 using a manual

10 產品合格證 一份

10 product certificate

11 產品裝箱單 一份

11 product packing list a

12 整機重量 約87 公斤

12 the weight of about 87 kg

產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
北京中航時代儀器設備有限公司
  • 聯系人:石磊
  • 地址:北京市房山區經濟技術開發區1號
  • 郵箱:zhsdyq@163.com
  • 傳真:86-010-80224846
關注我們

歡迎您關注我們的微信公眾號了解更多信息

掃一掃
關注我們
版權所有 © 2025 北京中航時代儀器設備有限公司 All Rights Reserved    備案號:京ICP備14029093號-1    sitemap.xml
管理登陸    技術支持:化工儀器網    
午夜精品久久久久久久无码| 少妇AV一区二区三区无码| 清纯校花挨脔日常H| 天堂8在线天堂资源BT| 69久久夜色精品国产69| 亚洲色精品三区二区一区| 中文无码熟妇人妻AV在线| 色综合久久中文字幕无码| 国产精品VⅠDEOXXXX国产| 精品人妻一区二区三区四区| 97人妻精品一区二区三区| 色偷偷人人澡人人爽人人模| 久久AV喷潮久久AV高清| 亚洲一区二区三区无码久久| 国产精品久久久久久爽爽爽床戏| 上司人妻互换HD无码中文字幕| 少妇厨房愉情理9仑片视频| 欧美性激烈粗大精品XXX| 新岳乱合集500系列| 小SAO货水好多真紧H无码视频| XXXXX性BBBBB欧美| 国产第一页屁屁影院| 国产精品久久久久久久9999| 野外吮她的花蒂两男一女| 日本少妇做爰全过程毛片| 欧美激情精品久久久久久| 欧美精品一区二区少妇免费A片| 国产精品扒开腿做爽爽爽视频| 国产乱子伦精品无码专区| 精品一区二区三区在线观看| 又湿又紧又大又爽A视频| 国产精品久久久| 高清家庭影院| 少妇极品熟妇人妻无码| 欧美牲交a欧美牲交| 亚洲AV无码一区东京热久久| 日日噜噜噜夜夜爽爽狠狠| 国产精品宅男擼66M3U8| 双胞胎(H)互攻| 欧美一性一乱一交一视频| 久久午夜夜伦鲁鲁片无码免费|